Documentation

SC1302

Suggest Edits
354

SC1302 Product Overview

The SC1302 LTE CAT-M1 is a battery-operated tracking device engineered for capturing in-transit temperature and location. It is an ideal solution for tracking shipments in varied weather conditions, over the road, in flight and at sea when device retrieval is not required or possible.

📘

Click the link below to view the SC1302 Product Datasheet.

calamp.comcalamp.com
SC1302™ - CalAmp

📘

Device Pre-Deployment & Deployment Guide

Device Pre-Deployment

Verifying Device Functionality:
Press and hold activation for 2 seconds then release on the top of the SC1302 to activate the device. An LED will turn RED and continue to flash while the device is on at 15 second intervals.

The device will generate and send a position report to the SC iOn™ Command platform upon activation.

  • Log on to the SC iOn™ Command platform at https://www.scioncommand.com
  • Click on TRACKING DEVICES from the top menu bar
  • Click the filter icon in the MDN column
  • Enter the last 4 digits of the MDN number in the blank box under the “Show items with value that:”
  • Click the FILTER button
1085

Check the Date Updated and Address columns to verify that the platform has received a current position Verify that the device battery percentage shown in the Battery% column is 95% or higher

🚧

If the device has not reported a current position within 5 minutes of powering on, move the device near a door or window to allow a clear view of the sky.

Once the device has successfully reported a current position to the SC iOn™ Command platform it is now ready to be deployed on a shipment.

Device Deployment

Device Placement in a Shipment:
In order to achieve the best transmission possible, the SC1302 device must be placed properly inside the container or trailer with the antenna facing the correct way.

Device placement will vary based on the type of shipping containers and trailers being used and cargo being shipped.

The antenna on the SC1302 faces the TOP of the device (button side).

For container shipments, to optimize performance, we recommend placing the device at the front of the container with the antenna facing up (button side up).

Device Recommended Placement:

  • Rear of Trailer: Antenna facing towards doors in back
  • Fiberglass Roof: place device on top of load with antenna facing up
  • Wood Floor: place device at the bottom with antenna facing down

❗️

Do not place on top of wheel well or axles

📘

For questions, please contact the Technical Account Management (TAM) team at:
[email protected] *

Updated over 3 years ago